CT Tag and tutorial "NEVER TOO LATE TO BE" in french and english  
for SkyScraps 
CT TAG et tutorial " NEVER TOO LATE TO BE" en français et en anglais 
pour Skyscraps
with new PTU Scrapkit "Dangerous B!" by SkyScraps at SATC
and "Roxy" tube by Diana Gali at SATC
and my FTU Freebie Template 2 available here


TUT /TUTORIEL
for/pour  SkyScraps CT guest 

Version Française:

Ce tutoriel  est  une création personnelle,il est réalisé sur PS CS6,  il ne peut être copié et toute ressemblance est complètement fortuite.
**matériel utilisé**
Pour réaliser ce tag il vous faudra , le Kit PTU "Dangerous B" de SkyScraps

le  tube PTU "Roxy" de Diana Gali
mon template 2 que vous trouverez  ici
et la poilice   "Typewriter from hell" font sur dafont.com 
--C'est Parti--

Tout d'abord ouvrez mon template et sauvegardez le , il vous servira de base de travail.
template calque 1 utilisez une couleur transparente,
calque 2 en rouge biseautage, estampage, ombre portée et inscrustation de motif
calque 3 ombre portée, placez l'image de fond du tube au dessus et appliquez un masque d'écrétage, déplacez le fond à volonté jusqu'à ce que vous obteniez l'effet désiré pour l'arc en ciel et ainsi positionnez le tube image de près et utilisez à nouveau un masque d'écrétage, vous placerez plus précisement celui-ci à l'intérieur du rond sur la gauche  un peu plus tard comme vous le voyez sur le produit final, 
template image 4 en bleu, placez maintenant les éléments 66, 15 et 4 de votre kit,
 template image 5 choisissez une couleur arc en ciel, template image 6 et template image 7  j'ai utilisé des couleurs tendres et fraiches un vert pomme et un mauve, maintenant les éléments 53 et 61 au milieu en bas, l'élément 46 avec une opacité 76 %, pour le dernier template placez le morceau du tube que vous préferez, 
j'ai choisi les bracelets : 
Transformez le en noir et blanc et appliquez un masque d'écrétage de sorte à ce qu'il rentre parfaitement  dans le petit cercle, 
faites pareil pour le tube à droite à l'intérieur du template image 3,
 appliquez masque d'écrétage et opacité à 60%,
maintenant le tube du milieu placez le comme montré sur l'image,
 Les éléments doivent être positionnés comme sur l'image 
et au besoin légèrement diminués.
Maintenant choisissez votre police "Typewriter from hell" taille 71,88,
choisissez la couleur  de votre choix , (de même pour le petit texte sur la droite)
j'ai choisi une couleur qui se mariait bien et placé le texte sur la gauche près du tube.
Si vous désirez avoir un effet porcelaine vous pouvez également appliquer un filtre porcelaine sur le produit final.
Pour l'animation, j'ai sauvegardé le tube en noir et blanc pour obtenir cet effet et j'ai utilisé 4 images jpg que j'ai placé dans le programme giffun : vitesse 20, j'ai utilisé deux différents type de filtres porcelaine pour l'image 1 et 2, changé l'image en noir et balnc pour la 3 et la 4 utilisé notre image actuelle. et sauvegardé le tout en .gif.
Voilà il ne vous reste désormais plus qu'à ajouter les copyrights nécessaires en les  positionnant bien lisiblement et pensez à sauvegarder régulièrement. Sauvegardez  le produit final au format jpeg ou png
voilà votre tag est prêt :)
------------------------
English version
This tut is a personal creation on PS CS6, it cannot be copied and any resemblance is completely fortuitous.
**To realize this tag you will need you to get**
SkyScraps PTU ScrapKit "DangerousB" 
the PTU tube "Roxy" by Diana Gali
my template 2 available here
and  "Typewriter from hell" font available at dafont.com   
---let's go---
First, open your template and save it to use it as your .psd.
template layer 1 use a transparent color,
template layer 2 red color, emboss and drop shadow, 
template layer 3 drop shadow, place the background of the tube over it and clipping mask, move the background as wished to select the right rainbow color 
and get a nice effect on the top of it place the close shot of the tube and use clipping mask, you'll place it later on inside the round circle on the left part as shown on the tag,template layer 4 blue color, place now the elements 66, 15 and 4 of your kit, 
 template layer 5 rainbow color, template layer 6 and template layer 7 i used fresh colors for this one green and mauve, now place the elements 53 and 61 on the bottom middle part of your tag, element 46 opacity 76 %, template last layer and on the top of it the part of the tube you like better, i chose the hand and the bangles and changed it to black and white color and clipping mask so it fits inside the little circle , 
same for the right tube in the template layer 3 use clipping mask opacity 60%, 
now the tube in the middle and place it as shown 
 The elements need to be placed as shown and resize them slightly.
Now you need to set your font "Typewriter from hell" size 71,88
and choose the color of your choice, (same for the little text on the right) 
i took a matching color and placed the text on the left part close to the tube.
If you want to have a porcelain effect you can add a porcelain filter.
For the animation, i saved the tube in black and white to get this effect 
and used 4 .jgs files in giffun program : speed 20, 2 with different porcelain filters, 1 black and white and the one you just saved.
Your tag is now ready : do not forget to save it in . jpg or in .png and do not forget to add the required copyrights and licenses on your realization.
Thanx to have followed this tut, I hope you appreciated it :)


animated version / version animée


Leave a Reply